65 50 025 Removing and installing/replacing video switch

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .

NOTE: Follow instructions for HANDLING OPTICAL FIBRES .

Necessary preliminary tasks:

Disconnect BATTERY NEGATIVE LEAD
Remove LUGGAGE COMPARTMENT WHEEL ARCH TRIM on left.

NOTE: Video switch is located on the back of the bracket for the TV module.

Release screws (1) and nuts (2).

Remove TV module (3) including bracket.

Fig 1: Identifying TV Module, Screws And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Unfasten plug connection (2) and disconnect.

Remove video switch (3).

Fig 2: Identifying Plug Connection And Video Switch And Screws

Courtesy of BMW OF NORTH AMERICA, INC.