Install side marker
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
Release liner* (1) and lightly press side marker (2) to side wall.
Check position and realign, if necessary.
The minimum contact pressure is achieved by firmly pressing your thumbs or the balls of your hands over the entire joining area (holding time approx 1 second).
Firm thumb pressure approx. 35 N/cm2 .
*Liner is protective film at new side marker.