16 13 015 Removing and installing/replacing tank leak diagnosis module (gasoline vehicles with US DMTL version)

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove CARBON CANISTER

Unlock and disconnect snap fastener (1).

Fig 1: Identifying Carbon Canister Snap Fastener

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove diagnosis module (2).

Installation note:

Replace gasket (3).

Fig 2: Removing Diagnosis Module

Courtesy of BMW OF NORTH AMERICA, INC.