51 43 148 Removing and installing or replacing trim panel on left or right door post (top)
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.
Unclip trim panel (2) in lower area.
Pull off trim panel (2) towards bottom.
Installation note:
Make sure trim panel (2) is correctly seated in edge protection (1).
Complete removal only:
Release BELT SCREW on front seat.
Feed out seat belt strap (3) from trim panel (2).
Installation note:
Guides (1) and clips (2) on trim panel (3) must not be damaged.