LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3309 (Engine - Repair) >> Intake Manifold >> 11 61 730 Check BMW diagnosis system for excess pressure and vacuum (N63) >> Vacuum pressure measurement

Vacuum pressure measurement

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

Prepare diagnosis tester on diagnosis unit.

  1. Screw in pressure sensor.
  2. Connect stimuli cables (2) to positive and negative.
  3. Connect 12V battery cables (3) to vehicle battery positive and negative.
  4. Controller for vacuum connection.
  5. Vacuum connection (Red).
Fig 1: Measuring Vacuum Pressure
G05501862Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals