LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3307 (Brakes - Repair) >> Front Brakes >> 34 11 667 Precision-turning both front brake discs on both sides >> Stationary brake disc lathe

Stationary brake disc lathe

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Only BMW-approved brake disc lathes may be used!

In the case of stationary brake disc lathes, the BRAKE DISC  must be removed.

Please refer to the equipment manufacturer's operating instructions for the exact procedure.

Fig 1: Identifying Stationary Brake Disc Lathe
G08505060Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals