LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3304 (Maintenance And General Information - Repair) >> Check, Add, Change Transmission Oil >> 00 11 500 Checking/topping up oil level in automatic transmission (GA8HP45Z, GA8HP70Z, GA8HP90Z) >> Adding transmission oil

Adding transmission oil

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

Stand vehicle on a level surface and secure against rolling off.

Undo oil filler plug (1).

Add automatic transmission fluid according to instructions in the BMW diagnosis system.

Fig 1: Identifying Oil Filler Plug
G08484121Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Replace sealing ring/oil filler plug

Tightening torque: 24 11 3AZ

Tighten down oil filler plug using

  1. Hexagon socket wrench AF 8
  2. Torque wrench
  3. Socket AF 8
    Fig 2: Tightening Oil Filler Plug Using Socket Wrench
    G04792697Courtesy of BMW OF NORTH AMERICA, INC.