LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3285 (Rear Axle - Repair) >> Output Shafts >> 33 21... Pressing output shaft out of drive flange and drawing in >> The following work steps describe pressing out the output shaft

The following work steps describe pressing out the output shaft

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

The following tools are required to press out the output shaft from the drive flange, see graphic for arrangement:

Fig 1: Pressing Out Output Shaft From Drive Flange Using Tools
G08504926Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals