31 21 Wheel Bearings and Steering Knuckle
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - WHEEL BEARINGS AND STEERING KNUCKLE
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Wheel bearing to swivel bearing | F01 / F02 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 / F25 | M12 | Replace screws. | |
| Jointing torque | 80 Nm | |||
| Angle of rotation | 90 ° | |||
| 2AZ Drive flange to front axle shaft end | F03 | 420 Nm | ||
| 3AZ Brake caliper stud bolt to swivel bearing | F10 M5 / F12 M6 / F13 M6 | Renew the stud bolt. (micro-encapsulated) | 20 Nm |