24 11 Transmission housing, transmission oil sump
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - TRANSMISSION HOUSING, TRANSMISSION OIL SUMP
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Transmission oil sump | GA6HP19Z / GA6HP26Z / GA6HP32Z | M6 | 10 Nm | |
| 2AZ Oil drain plug | GA6HP19Z / GA6HP26Z / GA6HP32Z / GA8HP45Z / GA8HP70Z / GA8P70H | M16x1.5 M24x1 M18x1 |
Plastic oil sump | 8 Nm |
| 3AZ Oil filler plug | GA6HP26Z / GA6HP32Z | M30x1.5 | 80 Nm | |
| GA6HP19Z / GA6HP26Z / GA6HP32Z / GA8HP45Z / GA8HP70Z / GA8P70H / GA8HP90Z | M18x1.5 | 35 Nm | ||
| 4AZ Transmission oil sump | GA8HP45Z / GA8HP70Z / GA8P70H / GA8HP90Z | M6 | Replace aluminium screws; jointing torque and angle of rotation must be observed without fail. | |
| 1. Jointing torque | 4 Nm | |||
| 2. Angle of rotation | 45 ° | |||
| Steel screws | 10 Nm | |||
| 5AZ Oil drain plug | GA8HP90Z | M10 | 12 Nm | |
| 6AZ Heat shield on gearbox | GA8HP45Z / GA8P70Z | M8 | 19 Nm | |
| GA8HP45Z | M6 | 8 Nm | ||
| 7AZ Ground strap to body and transmission | GA8HP45Z, GA8HP70Z, GA8P70H | M8 | 19 Nm |