LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3256 (Body Equipment - Special Tools) >> Body Equipment >> 51-2190 Adjuster

51-2190 Adjuster

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

0494325 512190 Adjuster Minimum set: Mechanical tools MW

NOTE: (door lock tensioner) For pre-tensioning front and rear door locks when installing. Change to tool through use of noise-optimized locks from 02/2004. Illustration items: 1 = Knurled nut 51 2 191 2 = Support 51 2 192 3 = Guard 51 2 196 4 = Mandrel 51 2 197 [Released]
Fig 1: Identifying Adjuster (0494325)
G04739526Courtesy of BMW OF NORTH AMERICA, INC.

Storage Location: B44, C44

SI number: 01 06 02 (864)

Consisting of:

  1. 4 = 0494907 Mandrel
    NOTE: Replaces mandrel 51 2 194 [Released]
  2. 3 = 0494906 Guard
    NOTE: Replaces guard 51 2 193 [Released]
  3. 2 = 0494474 Shaped element
    NOTE: E85 (Discontinued) [Discontinued]
  4. 2 = 0494473 Mandrel
    NOTE: Is replaced by 51 2 197 with the use of noise-optimized locks from 02/2004 Replaced by 51 2 197 (0 494 907) [Replaced]
  5. 2 = 0494472 Guard
    NOTE: Is replaced by 51 2 196 with the use of noise-optimized locks from 02/2004 Replaced by 51 2 196 (0 494 906) [Replaced]
  6. 2 = 0494471 Upholstery
    NOTE: [Released]
  7. 1 = 0494470 Nut
    NOTE: (Knurled nut) Replaced by 00 9 120 (0 490 504) [Released]