65 50 150 Removing and installing/replacing trim for rear cabin monitor base at front and rear

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 340

IMPORTANT: Trims may only be replaced in pairs so as to avoid differences in color.

Using special tool 00 9 340 , unclamp trim (1) on both sides.

Fig 1: Removing Trim Using Special Tool (00 9 340)

Courtesy of BMW OF NORTH AMERICA, INC.

Unclamp trim (1) for base at front with special tool 00 9 340 and remove.

Fig 2: Removing Front Base Trim Using Special Tool (00 9 340)

Courtesy of BMW OF NORTH AMERICA, INC.

Open armrest (1).

Unclamp trim (2) for base at rear with special tool 00 9 340 and feed out.

Fig 3: Removing Rear Base Trim Using Special Tool (00 9 340)

Courtesy of BMW OF NORTH AMERICA, INC.