New Part Preparation
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
Fit luggage compartment floor from underneath and adjust in conjunction with tail panel and secure.
In areas (1) to (3), set 4.2 mm diameter bore holes for blind rivets.
Courtesy of BMW OF NORTH AMERICA, INC.
Remove new part and deburr holes.
IMPORTANT:
Do not grind new parts and body in area of bonding surfaces.