Fitting rubbing strip
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
Installation:
Replace rubbing strip (1).
Pull off protective film from adhesive tape on rubbing strip (1).
Place rubbing strip (1) over holes (2) in front door and align.
Fit rubbing strip (1) and press down firmly with special tool 51 0 300 over entire adhesive area.