11 65 712 Removing and installing/replacing electric changeover valve on exhaust turbocharger, left (S63)
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove acoustic cover.
- Remove INTAKE FILTER HOUSING .
Electric changeover valves, cylinders 5-8
Disconnect plug connections (1) on pressure converters.
Installation:
Plug connections (1) must snap audibly into place!
Unfasten screws (2).
Tightening torque 11 65 8AZ .
Remove pressure converter.
Assemble engine.
Follow diagnosis instruction.
- Complete vehicle
- Drive
- Engine electrical system
- Air supply
- Boost pressure control