LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3216 (Brakes - Repair) >> Front Brakes >> 34 11 667 Precision-turning both front brake discs on both sides >> Stationary brake disc lathe

Stationary brake disc lathe

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Only BMW-approved brake disc lathes may be used!

In the case of stationary brake disc lathes, the BRAKE DISC MUST BE REMOVED .

Please refer to the lathe manufacturer's instruction manual for the exact procedure.

Fig 1: Identifying Stationary Brake Disc Lathes
G08528089Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals