51 71 Seals and Loose Body Parts
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - SEALS AND LOOSE BODY PARTS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Rear spoiler | E70 | Screw | 2 Nm | |
| Nut | 7 Nm | |||
| 2AZ Tension strut in engine compartment | E70, E71, E72 | Replace screws | ||
| Jointing torque | 19 Nm | |||
| Torque angle | 90 ° | |||
| 3AZ Diagonal strut to bumper carrier | E70, E71, E72 | 18 Nm | ||
| 4AZ Cross-strut to body | E70, E71, E72 | Replace screws | ||
| Jointing torque | 10 Nm | |||
| Torque angle | 90 ° | |||
| 5AZ Lashing rail to body | E70, E71, E72 | 20 Nm | ||
| 6AZ Support piece, sill to body | E70, E71, E72 | M8 | 10 Nm | |
| 7AZ APM bracket to cross-strut | E72 | 11 Nm | ||
| 8AZ Intake pipe bracket to cross-strut | E72 | 11 Nm |