54 12 499 Replacing seal for glass slide/tilt sunroof frame
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove complete GLASS SLIDE/TILT SUNROOF (FRAME) .
Up to production date 03/2014:
Detach seal (1) from glass slide/tilt sunroof (2).
Installation note:
Groove of seal must point outwards.
Place gasket gently in position and align limit points parallel to each other.
Press seal (1) firmly on frame (2) and ensure correct seating.
After production date 03/2014:
Loosen sealing (1) from frame (2).
Observe NOTES for securing components with adhesive tape.
Remove adhesive residue.
Installation note:
Clean the adhesive area.
Bond sealing (1) to frame (2)