65 50 165 Removing and installing/replacing trim for rear monitor display at rear
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION)
.
Necessary preliminary work:
Release screws (1).
Tightening torque 65 50 1AZ .
Remove cover (3) from rear monitor (4), unclipping plug (2) and feed out cable.
Installation note:
Make sure cover (3) is correctly seated on rear monitor (4).