LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3147 (Lights - Repair) >> Headlights >> 63 12 860 Replacing control unit for left xenon headlight >> 63 12 860 Replacing control unit for left xenon headlight (up to production date 07/13)

63 12 860 Replacing control unit for left xenon headlight (up to production date 07/13)

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Version with xenon lighting system: Danger to life due to high voltage!

Disconnect all components from voltage supply before removal.

Work on the entire xenon lighting system (ignition device, control unit and bulb) may only be carried out by qualified personnel.

Comply with NOTES ON HANDLING EXTERIOR LIGHTS .

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Necessary preliminary tasks: 

Release screws (1).

Tightening torque 63 12 5AZ .

Remove control unit for xenon headlight (2) upwards from headlight (3).

Fig 1: Identifying Headlight And Screws
G06886094Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

When installing control unit for xenon headlight (1), make sure sealing sleeve (2) is correctly seated.

Fig 2: Identifying Sealing Sleeve
G06886095Courtesy of BMW OF NORTH AMERICA, INC.