LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3146 (Pedals - Repair) >> Accelerator Pedal Actuation >> 35 40 001 Removing and installing or replacing accelerator pedal module

35 40 001 Removing and installing or replacing accelerator pedal module

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Take off cap.

Release screw.

Pull accelerator pedal module upwards out of fixture.

Installation note: 

Tightening torque 35 40 1AZ .

Fig 1: Pulling Accelerator Pedal Module Upwards Out Of Fixture
G04726718Courtesy of BMW OF NORTH AMERICA, INC.

Pull off connector (1).

Remove accelerator pedal module.

Fig 2: Identifying Accelerator Pedal Module Connector
G06894916Courtesy of BMW OF NORTH AMERICA, INC.
IMPORTANT: Accelerator pedal module can only be replaced completely with adapter plate.