Special tools for the ACC

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Wheel adapter for ACC wheel laser: BMW order number: 36 1 100
If a KDS quick-release fastener from the companies Beissbarth or Hunter is not available, a separate quick-release fastener can be ordered as an alternative, refer to illustration.

Fig 1: Identifying ACC Wheel Holder
Courtesy of BMW OF NORTH AMERICA, INC.
Adjustment key for ACC sensor 1: BMW order number: 36 1 130
The Torx key (T20) is needed for adjusting ACC sensor 1.

Fig 2: Identifying Torx (361130)
Courtesy of BMW OF NORTH AMERICA, INC.
Adjustment key for ACC sensor 2: BMW order number: 66 3 150
The socket for adjusting ACC sensor 2 has a width across the flats of 3.5 mm and a shaft length of 160 mm.

Fig 3: Identifying Socket Wrench (663150)
Courtesy of BMW OF NORTH AMERICA, INC.