LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3143 (Collision - Body Panel Repair (F01, F02) (AWD)) >> Body Repair General Information >> 41 00... Opening Welded Connections >> Opening MAG Weld Seams And MIG Brazing Seams >> Procedure

Opening MAG Weld Seams And MIG Brazing Seams: Procedure

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Grind off weld seams with a belt or angle grinder. Do not grind the base material thin.

Use a chisel to separate the sheet metal flange and remove the component.

scientia non olet · About LEMON Manuals