Opening Adhesive Bonds
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
If necessary, open existing PUNCH OR BLIND RIVETS .
Roughly cut out damaged component.
WARNING:
Extract vapors and gases.
Use personal protective clothing/equipment.
Use personal protective clothing/equipment.
Heat adhesive flange with a hot-air blower. Heat components to max. 250 °C object temperature.
The component can be peeled with the aid of pliers. Do not damage adjacent components.
Remove adhesive residue from connecting flange.