37 14 525 Removing and installing/replacing control unit for air supply system
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION)
.
Necessary preliminary work:
- Remove ignition key.
- Disconnect BATTERY NEGATIVE CABLE .
- Remove RIGHT LUGGAGE COMPARTMENT TRIM PANEL .
Unlock plug connections (2) and disconnect.
Remove control unit (1).
After installation:
- Replacement only: Carry out PROGRAMMING/ENCODING .
- Replacement only: Carry out RIDE HEIGHT ADJUSTMENT .