52 14 020 Removing and installing/replacing seat frame on left or right front seat (from production date 07/2012 through model year 2015)
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work:
- Remove DRIVER'S SEAT or FRONT PASSENGER SEAT .
- Remove INNER COVER ON FRONT SEAT .
- Remove OUTER COVER ON FRONT SEAT .
Drill out rivets (1) on left and right.
Installation note:
Completely remove rivet residue.
Unhook seat cover on left and right.
Release all plug connections and cable clips from the seat frame.
Release screws (1).
Disengage backrest frame with wiring harness.
Installation note:
Clean thread of nut in event of repeated use.
Apply screw locking.
Tightening torque 52 10 2AZ .
Replacement only
- Remove complete seat cover. See REMOVING SEAT COVER FOR DRIVER'S SEAT or REMOVING SEAT COVER FOR FRONT PASSENGER SEAT .
- Remove FORWARD/BACK SEAT ADJUSTMENT DRIVE UNIT
- Remove SEAT ANGLE ADJUSTMENT DRIVE UNIT
- Remove SEAT HEIGHT ADJUSTMENT DRIVE UNIT