16 12 060 Removing and installing/replacing carbon canister (US version NVLD)

WARNING: This page does not describe the selected car, but rather 24 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750i, and 2015 BMW 750Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work

Remove rear right WHEEL ARCH PANEL .

Unlock snap fasteners (1) and remove tank ventilation lines.

Disconnect plug connection (2).

Release screws (3) and swing out carbon canister.

Installation note:

Tightening torque 16 13 1AZ .

The following components must be modified when the carbon canister is replaced:

Fig 1: Identifying Plug Connection, Snap Fasteners And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

DUST FILTER NVLD .
PRESSURE SWITCH NVLD .