16 12 010 Removing and installing/replacing carbon canister (US version)
WARNING: This page does not describe the selected car, but rather 24 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750i, and 2015 BMW 750Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks
- Remove rear right WHEEL ARCH COVER .
Disconnect plug connection (1).
Unlock quick-release fasteners (2) and disconnect vent lines.
Release screws (3) and swing out carbon canister (4).
Installation:
Tightening torque 16 13 1AZ .
The following components must be modified when the carbon canister is replaced: