22 32 070 Removing and installing/replacing the transmission bearing support (N55) (AWD)
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750i, and 2015 BMW 750Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove rear UNDERBODY PROTECTION and retaining plate on left.
- Release the FRONT PROPELLER SHAFT from the transfer box
Release screws (1) and nuts (2).
Remove transmission bearing support on left transmission side.
Tightening torque 22 32 9/10AZ .