22 32 055 Removing and installing/replacing transmission bearing block (N55) (AWD)
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750i, and 2015 BMW 750Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 51 3 310
Necessary preliminary tasks:
- Remove transmission support bracket
- Release transmission crossmember from body.
- Slightly lower the transmission.
Release screws (1) with special tool 51 3 310.
Tightening torque 22 32 7AZ .
Remove transmission mounting bracket (2) on left transmission side.