51 24 100 Removing and installing/replacing rear lid lock

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove PANEL FOR REAR LID .

Unlock plug connections (1) and disconnect.

Release screws.

Tightening torque 51 24 01AZ .

Feed out rear lid lock.

Fig 1: Locating Rear Lid Lock Mounting Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip Bowden cable sleeve (1).

Feed out Bowden cable nipple in direction of arrow.

Fig 2: Removing Bowden Cable Nipple

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Perform function check with rear lid open.