51 23 201 Removing and installing/replacing release mechanism for retaining hook on engine compartment lid

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Screw connection only:

Release screws (1) on engine compartment lid (2).

Unhook Bowden cables (4) from release element (3).

Remove release element (3).

Fig 1: Identifying Bowden Cable, Release Cable, Element And Engine Compartment Lid Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Riveting:

Drill off blind rivets (1).

Unhook Bowden cables (2) from release element (3).

Remove release element (3).

Fig 2: Identifying Blind Rivets, Bowden Cables And Release Element

Courtesy of BMW OF NORTH AMERICA, INC.