51 23 101 Removing and installing/replacing left active engine compartment lid lock

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Disconnect NEGATIVE TERMINAL .
Remove SIDE ENGINE COMPARTMENT LID GASKET MOUNTING in working area.

NOTE: Graphic for example purposes only (originates from F01).

Remove all screws (1) at join (2) from engine compartment lid door lock to center of vehicle; slacken remaining screws (1).

Tightening torque 51 61 6AZ .

Fig 1: Identifying Engine Compartment Lid Lock Connection And Screws

G06885627

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Connection (2) does not have to be removed.

Release screws (2) on engine compartment lid lock (1).

Tightening torque 51 23 2AZ .

Fig 2: Identifying Engine Compartment Lid Lock And Screws

G06885631

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Shown removed here for purposes of clarity.

Disengage, unlock and disconnect plug connections (1) at lock carrier.

Disconnect Bowden cable (2).

Feed out engine compartment lid lock (3) upwards to the front.

Fig 3: Identifying Plug Connections, Bowden Cable And Engine Compartment Lock

G06885632

Courtesy of BMW OF NORTH AMERICA, INC.