LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3133 (Body Equipment - Repair) >> Floor/Luggage Compartment/Engine Compartment Trim Panels >> 51 47 491 Removing and installing/replacing rear underbody protection

51 47 491 Removing and installing/replacing rear underbody protection

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Unscrew all bolts.

Tightening torque 51 75 1AZ .

Remove underbody protection (1).

Installation note: 

Make sure underbody protection (1) is correctly seated.

Fig 1: Locating Underbody Protection Bolts
G06889547Courtesy of BMW OF NORTH AMERICA, INC.