(cylinder bank 5 to 8)
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750i, and 2015 BMW 750Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work:
- Remove LEFT INLET CAMSHAFT .
- Remove left EXHAUST CAMSHAFT .
IMPORTANT:
Used rocker arms (1) may only be reused in the same position.
Tolerance classes are not required.
Tolerance classes are not required.
Remove rocker arm (1) and set down in neat order in special tool 11 4 480 .
Install rocker arm (1).
Align all rocker arms (1) straight.
Assemble engine.