34 00 012 Parking brake function check
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
- Connect BMW diagnosis system.
- Carry out vehicle test
- Call up "Workshop braking-in" service function.
- Start breaking-in program.
- (Parking brake indicator lamp in instrument cluster flashes at low frequency)
- Drive vehicle onto brake analyzer and pull parking brake button once.
- Parking brake is applied at approx. 15 km/h with reduced force.
- (Parking brake indicator lamp in instrument cluster flashes at high frequency)
- Breaking-in procedure takes 3 minutes.
- Breaking-in procedure can be terminated by pressing the parking brake button.
- Delete fault memory.