LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3125 (General Electrical System - Repair) >> Switch >> 61 31 041 Removing and installing operating element for assist system

61 31 041 Removing and installing operating element for assist system

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD PROTECTION) .

Necessary preliminary tasks 

Carefully lever driver assist system (1) out with special tool 00 9 317 .

Disconnect plug connection behind and remove driver assistance system (1).

Installation note: 

Make sure driver assistance system (1) is correctly seated.

Fig 1: Removing Driver Assist System Out Using Special Tool (00 9 317)
G08513700Courtesy of BMW OF NORTH AMERICA, INC.