LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 312 (Body Equipment - Repair Instructions) >> General >> 51 23 265 Removing and installing/replacing left or right gas strut for engine bonnet/hood

51 23 265 Removing and installing/replacing left or right gas strut for engine bonnet/hood

WARNING: This page is about a different car, the 2002 BMW M Roadster, 2002 BMW M Coupe, 2001 BMW M Roadster, and 2001 BMW M Coupe. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Risk of injury and damage!
For the following tasks, you must take the appropriate measures to support the engine bonnet/hood.
As an alternative, you can enlist the help of a second person to hold the bonnet/hood.

Raise bonnet/hood lid.

Removing gas spring strut at top and bottom:

  1. Push retainer spring to end of gas spring strut.
  2. Remove gas spring strut from ball head.
    Fig 1: Removing Gas Spring Strut From Ball Head
    G03199210Courtesy of BMW OF NORTH AMERICA, INC.