Warm processing:

WARNING: This page is about a different car, the 2002 BMW M Roadster, 2002 BMW M Coupe, 2001 BMW M Roadster, and 2001 BMW M Coupe. However, it is still accessible from the selected car via links, so may be relevant.

Open aluminum membrane at rear end of cartridge.

Place cartridge in cartridge oven.

Heat glue cartridges to 80°C for one hour in oven (Sourcing Reference: BMW Parts Service).

Comply with instructions on gluing windows, refer to 51 31... Instructions on gluing windscreen

Fig 1: Identifying Warm Processing

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Cover radiator/engine compartment (top) and front side walls with protective covers.

Pull seal (1) down from left to right.

Fig 2: Pulling Seal Down

Courtesy of BMW OF NORTH AMERICA, INC.