51 11 Front bumper
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - FRONT BUMPER
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Bumper to air duct, top | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F18 | 4 Nm | ||
| 2AZ Deformation element, top or bottom, to vertical connection | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | 11.8 Nm | ||
| 3AZ Deformation element to engine support | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 / F25 | M12 | Replace screws | |
| Jointing torque | 80 Nm | |||
| Angle of rotation | 270 ° | |||
| 4AZ Support to deformation element | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F18 / F12 / F13 | Replace screws and nuts | 27 Nm | |
| F25 | M8 | 20 Nm | ||
| 5AZ Carrier to deformation element, bottom | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | 11.8 Nm | ||
| 6AZ Deformation element, bottom, to adapter plate, front axle carrier | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | 19 Nm | ||
| 7AZ V-support to deformation element, top | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | 19 Nm | ||
| 8AZ Car registration number to bumper | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | 1 Nm | ||
| 9AZ Car registration number to bumper (thread repair) | F01 / F02 / F03 / F04 / F07 / F10 / F11 / F12 / F13 / F18 | M5 | 4.5 m | |
| 10AZ Carrier, bottom, to deformation element, bottom | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | 11.8 Nm | ||
| 11AZ Bumper to side wall | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | 3 Nm | ||
| 12AZ Bumper to radiator air duct | F25 | 5 Nm |