34 51 Slip control system (DSC)
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - SLIP CONTROL SYSTEM (DSC)
| Type | Thread | Tightening specifications | Value | |
|---|---|---|---|---|
| 1AZ Control unit to hydraulic control unit | F01, F02, F03, F04, F06, F07, F10, F11, F12, F13, F18 | Initial torque | 2±0.5 Nm | |
| Final torque | 4.30.5 Nm | |||
| 2AZ ICM control unit to body | F01, F02, F03, F06 / F07, F07, F10, F11, F12, F13, F18, F25 | Replace screws. | 8 Nm | |
| 3AZ Pulse sensor to swivel bearing/wheel carrier | F01, F02, F03, F04, F06, F07, F10, F11, F12, F13, F18, F25 | M6x16 | 8 Nm | |
| Pulse sensor to swivel bearing, front, all-wheel drive vehicles | F01, F02, F04, F06, F07, F10, F11, F12 | M6x16 | Hexagon screw AF 10 Replace screw |
12 Nm |
| 4AZ Hydraulic control unit to holder | F01, F02, F03, F04, F06, F07, F10, F11, F12, F13, F18, F25 | M8 | 8 Nm | |
| 5AZ Holder, hydraulic control unit, to body | F01, F02, F03, F04, F06, F07, F10, F12, F13, F11, F18 | 19 Nm | ||
| F25 | M6 | 8 Nm | ||
| 6AZ Pulse sensor adapter to swivel bearing | F03 | M6 | 8 Nm |