34 32 Brake Lines
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - BRAKE LINES
| Type | Thread | Tightening specifications | Value | |
|---|---|---|---|---|
| 1AZ Brake line screws / union screws | F01, F02, F03, F04, F06, F07, F10, F11, F12, F13, F18 | M12 x 1 | 14 Nm | |
| F01, F02, F03, F04, F06, F07, F10, F11, F13, F12, F18, F25 | M12 x 1 | Blue union screw connection in steel e.g. brake hose | 16 Nm | |
| F01, F02, F03, F04, F06, F07, F10, F11, F12, F13, F18, F25 | M12 x 1 | Blue union screw connection in aluminium e.g. hydraulic control unit | 17 Nm | |
| F01, F02, F03, F04, F06, F07, F10, F11, F12, F13, F18 | M10 x 1 | 14 Nm | ||
| F01, F02, F03, F04, F06, F07, F10, F11, F12, F13, F18, F25 | M10 x 1 | Blue union screw connection in steel e.g. brake hose | 16 Nm | |
| F01, F02, F03, F04, F06, F07, F10, F11, F12, F13, F18, F25 | M10 x 1 | Blue union screw connection in aluminium e.g. hydraulic control unit | 17 Nm | |
| 2AZ Brake hose to brake caliper, front | F01, F02, F03, F04, F03, F06, F07, F10, F11, F12, F13, F18, F25 | Cap screw | 17 Nm | |
| 3AZ Brake hose to brake caliper, rear | F01, F02, F03, F04, F06 / F07, F10, F11, F12, F13, F18, F25 | 24 Nm | ||
| F10 / F12 / F13 / M5 / M6 | M10x1 | Banjo bolt (renew seals) | 40 Nm |