33 55 Anti-roll bar
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - ANTI-ROLL BAR
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Retaining bracket, anti-roll bar to rear axle support | F01 / F02 / F03 / F04 / F07 / F06 / F10 / F11 / F12 / F13 / F18 | M10 | Replace screws. | 56 Nm |
| F25 | M8 | Replace screw. | 34 Nm | |
| 2AZ Anti-roll bar link to anti-roll bar/swinging arm | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 / F25 | M10 | Replace nuts. | 56 Nm |
| F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | M12 | Replace nuts. | ||
| Jointing torque | 45 Nm | |||
| Angle of rotation | 45 ° | |||
| 3AZ Vibration absorber to anti-roll bar bracket | F01 / F02 / F06 / F07 / F10 / F11 / F12 | Replace screw. | 19 Nm | |
| 4AZ Anti-roll bar link to wheel carrier | F25 | M10 | Replace screw. | 56 Nm |