31 11 040 Remove and install/replace stiffening plate
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Observe SAFETY INSTRUCTIONS for raising the vehicle.
Driving without stiffening plate is not permissible!
Necessary preliminary tasks:
- Remove underbody protection at front and rear. See REMOVING FRONT UNDERBODY PROTECTION and REMOVING REAR UNDERBODY PROTECTION .
Release screws (1).
Remove thrust panel (reinforcement plate) (2).
Installation note:
Replace screws (1).
Tightening torque 31 10 2AZ .