31 60 Output shaft
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - OUTPUT SHAFT
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Output shaft console to engine oil sump | F01 / F02 / F06 / F07 / F10 / F11 / F12 / F13 / F25 | M8 | 19 Nm | |
| 2AZ Output shaft to wheel hub | F01 / F02 / F06 / F07 / F10 / F11 / F12 / F13 / F25 | M16 | Observe instructions in Repair Manual.
See 31 60 005 REMOVING AND INSTALLING/REPLACING BOTH OUTPUT SHAFTS
, 31 60 000 REMOVING AND INSTALLING/REPLACING LEFT OR RIGHT OUTPUT SHAFT
, 31 21 180 REPLACING BEARING FOR FRONT WHEEL (ALL-WHEEL DRIVE VEHICLE)
or 31 12 050 REMOVING AND INSTALLING/REPLACING LEFT OR RIGHT TRAILING LINK (ALL-WHEEL DRIVE VEHICLE) Replace collar bolt and spring. |
|
| Jointing torque | 210 Nm | |||
| Angle of rotation | 90 ° |