31 35 Anti-roll bar
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - ANTI-ROLL BAR
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Retaining bar for stabiliser to front axle carrier/steering gear | F01 / F02 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | M12 | Replace screw. | |
| Jointing torque | 100 Nm | |||
| Angle of rotation | 105 ° | |||
| F03 | M12 | Replace screw. | ||
| Jointing torque | 100 Nm | |||
| F03 | M14 | Replace screw. | ||
| Jointing torque | 165 Nm | |||
| F25 | M10 | 56 Nm | ||
| 2AZ Stabiliser link to stabiliser / damper | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | M12 | Replace nuts. | |
| Jointing torque | 45 Nm | |||
| Angle of rotation | 45° | |||
| 3AZ Anti-roll bar link to anti-roll bar | F25 | M12 | Replace nut. | 100 Nm |
| 4AZ Anti-roll bar link to damper | F25 | M12 | Replace nut. | 108 Nm |