LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3084 (Steering And Wheel Alignment - Repair) >> Steering Wheel >> 32 33 000 Removing and installing/replacing steering wheel

32 33 000 Removing and installing/replacing steering wheel

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Chassis / wheel alignment is not  necessary after the steering wheel has been removed and installed or replaced.

Necessary preliminary tasks: 

Move wheels/steering wheel into straight-ahead driving position.

Disconnect plug connection (1).

Release screw (2) and remove steering wheel.

Installation note: 

Make sure connecting line(s) is/are correctly laid.

Tightening torque 32 33 1AZ .

Fig 1: Identifying Plug Connection And Screw
G06889693Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Before fitting steering wheel on steering column, ensure correct cable routing.

Align steering wheel by way of marking (1) to steering column marking (2) and attach.

Fig 2: Identifying Sport Steering Wheel Marking And Steering Column Marking Aligned
G04794487Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: