32 31 102 Replacing sleeve for steering shaft
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work:
- Remove EXHAUST SYSTEM (N63 only).
- Remove heat shield (N63 only).
- Remove underbody protection at front and rear. See REMOVING FRONT UNDERBODY PROTECTION and REMOVING REAR UNDERBODY PROTECTION .
- Remove COVER OF PEDAL MECHANISM .
- Remove BOTTOM STEERING SHAFT .
NOTE:
Steering shafts (1) and (2) are encoded to each other and can only be fitted together in one position!
It is helpful to mark spindles (1) and (2) to each other before they are pulled apart!
It is helpful to mark spindles (1) and (2) to each other before they are pulled apart!
Pull off steering shaft lower section (1) from steering shaft upper section (2).
Pull off steering shaft collar (1) from steering shaft upper section!