36-1100 Holder

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

0493771 361100 Holder MW

NOTE: (Wheel holder ACC) For configuring wheel laser for ACC adjusting device. [Released]

Storage Location

Individual

SI number

02 04 05 (208)

Consisting of:

Fig 1: Identifying Holder (0493771)

Courtesy of BMW OF NORTH AMERICA, INC.

= 0493772 Basic body
NOTE: Discontinued, only available via complete tool [cannot be ordered separately]
= 0493773 Pin
NOTE: (Complete magnetic pin) 5 units per holder. Remaining inventories will be sold off and then available as part of complete tool set 36 1 100 = 0493771 only. [Not available separately]
= 0493774 Pin
NOTE: (Sensor pin) 5 units per fixture. Remaining inventories will be sold off and then only available as part of complete tool set 36 1 100 = 0493771. [Not available separately]