LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3072 (Rear Axle - Special Tools) >> Rear Axle >> 33-5040 Open-end wrench

33-5040 Open-end wrench

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

0495551 335040 Open-end wrench Minimum set: Mechanical tools MW

In conjunction with: 33 5 070

NOTE: Open-end spanner SW50 with retaining clip For releasing and tightening down the insert nuts for the screw connection of the propeller shaft on the rear axle final drive. [Released]

Storage Location

A18

SI number

01 21 06 (300)

Fig 1: Identifying Open-End Wrench (0495551)
G04739482Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

  1. 3 = 0495583 Pin
    NOTE: (Pin with chain (2 pieces)) [Released]
  2. 2 = 0495582 Clip
    NOTE: Discontinued, only available via complete tool [cannot be ordered separately]
  3. 1 = 0495581 Basic body
    NOTE: [Released]